ESC HOT ROLLED U SHEET PILES

Inventory - Readily Available in Malaysia

U PROFILE SHEET PILES

The Hot Rolled U Sheet Pile was produced over 90 years ago and millions of tons of it have been used globally. The thicker rolled flange and interlock design enable multiple reusage making Hot Rolled U Sheet Piles a common choice for temporary works. Utilising various profile and interlock designs, ESC is able to offer stock and made-to-order Hot Rolled U Sheet Piles available from various countries in the world. With stock available in ESC facilities in China and UAE ESC is able to respond to urgent customer requests in a timely fashion at competitive prices.

REQUEST A QOUTE

ESC-HRU Hot Rolled Sheet Piles

Suitable Applications

ESC Hot Rolled U Sheet Piles - can be used for a multitude of applications and configurations such as:

Revetment works
Temporary & Permanent Retaining Wall
Flood Levees
Cutoff Wall
Quay Walls for Ports
Embankments
Breakwaters
Cofferdams
& More

Also commonly known as FSP II, FSP III, FSP IV, FSP 2, FSP 3, FSP 4

U Sheet Piles

1/4

Section Modulus Range

874-3820cm3/m

Width Range (single)

400-600mm

Thickness Range

10.3-27.6mm

Production Standards

BS EN 10249 Part 1 & 2

Steel Grades

SY295, SY390 & S355GP for Type II to Type VIL

Length

27.0m maximum

Standard Stock Lengths of 6m, 9m, 12m, 15m

Delivery Options

Single or Pairs
Pairs either loose, welded or crimped
Lifting Hole
By container (11.8m or less) or Break Bulk
Corrosion Protection Coatings

Corner Piles

Box Piles can be fabricated out of individual U sections to boost the Moment Capacity of the wall without changing the pile profile. Corners and junctions can be implemented using either a welded interlock or slicing a profile and welding it to the end profile.

Technical Information